Raspberry pi Archives - Foxlab Store

Raspberry pi

Showing all 14 products

Sort by

Add to Wishlist
20CM Jumper Wire Male to Male Dupont 40pc,10colours (Multicolor)

40P color DuPont line

Length: 200mm

Weight: 30 gm

Compatible with 2.54mm spacing pin headers

40pcs chromatic male to male color jump wire

High quality and in good working condition

Durable and reusable

Easy to install and use

₹89.00
₹89.00 Add to cart
Add to Wishlist
30pcs Flexible Breadboard Jumper Wires

The head of the cables is stronger, Don’t worry it will easy to fall.

Use for Arduino Or other kinds of circuit experiment.

High quality and in good working condition

Durable and reusable

Easy to install and use

₹65.00
₹65.00 Add to cart
Add to Wishlist
433Mhz RF Wireless transmitter and receiver kit

Wide input supply (2.5 V to 12V)

Easy to integrate (V+, GND, and Data)

The device in deep sleep mode when Data pin is grounded

Very small dimension.

₹99.00
₹99.00 Add to cart
Add to Wishlist
D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266

Use BRT (Bias Resistor Transistor)

Easier into flash mode.

30% increase in radiating area

Good stability.

₹400.00
₹400.00 Read more
Add to Wishlist
DIY 16 in 1 Sensor Module Kit for Arduino/Raspberry Pi-Multi 1 set

For beginners who are interested in Arduino

A complete set of Arduino’s most common and useful electronic components

Infrared sensor receiving module

Laser sensor module

Temperature and humidity sensor module

Infrared sensor module

5v relay module

Obstacle avoidance sensor module.

₹990.00
₹990.00 Add to cart
Add to Wishlist
DS3231 AT24C32 IIC Module Precision Clock Module RTC DS3231SN Memory module

1Hz output pin SQW.

32KHz output pin 32K.

Voltage Supply: 2.2 V ~ 5.5 V (for RTC).

Time Format: HH: MM: SS (12/24 hr).

Date Format: YY-MM-DD-dd.

DS3231 based RTC with 2032 Battery Holder.

Highly Accurate RTC

Real-Time Clock Counts

Digital Temp Sensor Output.

Register for Aging Trim.

Two Time-of-Day Alarms.

Programmable Square-Wave Output Signal.

Configurable I2C device Address for AT24C32 using SMD jumpers on PCB (A0, A1, A2).

₹115.00
₹115.00 Add to cart
Add to Wishlist
ESP32-CAM WiFi + bluetooth Development Board ESP32 With Camera Module OV2640

Modle: ESP32-CAM

Operating Voltage: 5V

SPI Flash: 32 Mbit

RAM: Inter 520KB+, External 4M PSRAM

Port: UART, SPI, I2C, PWM

The OV2640 image sensor features 2 megapixels (1632×1232 pixels)

₹1,200.00
₹1,200.00 Add to cart
Add to Wishlist
ESP8266 5V WiFi relay module ,smart home component, mobile APP remote control module

Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time

Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay

Transmission Distance : 400m (max)

Relay : 5V,10A/250V AC 10A/30V DC

Baud Rate: 9600.

Diode effusion protection;

Short response time

₹699.00
₹699.00 Add to cart
Add to Wishlist
GL-12 830 Points Solderless Breadboard

100% brand new and high quality

Practical and useful

Solderless breadboard with 840 points

Completely reusable and have a self-adhesive back

Easy component placement

₹79.00
₹79.00 Add to cart
Add to Wishlist
HC05 Bluetooth Transceiver Module

A breakout board for easier connectivity

Designed for 3.3v level TTL but will accept 5v level as well

Built in antenna with a range of up to 30 feet (range is dependent on a lot of things such as any obstacles or walls in the way so it may vary)

Supports baud rates from 1200 to 1382400 bps (default is 9600 bps)

VCC input voltage 3.3v to 6v

Bluetooth Specification v2.0+EDR

₹349.00
₹349.00 Add to cart
Add to Wishlist
LoRa ESP32 Module: OLED Display Bluetooth WIFI IOT Development Board for Arduino

The ESP32 LoRa SX1278 Module with 0.96 Inch Blue OLED Display , this series is the new development of the cost-effective networking program

Supports Sniffer, Station, softAP and Wi-Fi Direct modes

Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b

Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n

Receiver sensitivity up to – 98 dBm

UDP continues to throughput by 135 Mbps

₹1,990.00
₹1,990.00 Read more
Add to Wishlist
Raspberry Pi 3 Model B+ with 1.4GHz Quad core processo

Proccesor : Broadcom BCM2837B0 64-bit ARM Cortex-A53 Quad Core Processor SoC running @ 1.4GHz

Memory : 1GB RAM LPDDR2 SDRAM

Connectivity :

2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE

Gigabit Ethernet over USB 2.0 (Maximum throughput 300 Mbps)

4x USB2.0 Ports with up to 1.2A output

Video and sound:

1 x full size HDMI

MPI DSI display port

MPI CSI camera port

4 port stereo output and composite video port

Input power :

5V/2.5 ADC via micro USB connector

5V DC via GPIO header

Power over ethernet(POE) enabled

Operating temperature : 0 – 50C

₹3,300.00
₹3,300.00 Add to cart
Add to Wishlist
Raspberry Pi Zero Wireless WH (Pre-Soldered Header)

Fully HAT compatible

40pin GPIO (Unpopulated)

Stream and watch Hi-definition video output at 1080P

512MB RAM and Micro SD Slot for OS

Tiny Current Draw ~ 140mA at 5V!

Mini-HDMI for Video

Micro-USB OTG Host for Data and Power

Micro-CSI Camera Port

On-Board Bluetooth and WiFi.

₹1,599.00
₹1,599.00 Add to cart
Add to Wishlist
Solderless Breadboard 400 points

Perfect for Arduino shield prototyping and testing

Size: 3.3 x 0.3 inches

Accept wire with diameter20-29awg

Voltage/current: 300v/3-5a

₹79.00
₹79.00 Add to cart