Robotics Archives - Foxlab Store

Robotics

Showing 1–20 products from 23 products

Sort by

Add to Wishlist
2 WD Smart Robot Car Chassis Kit

Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.

This car is the tachometer encoder.

With a 4 AA battery box (batteries not included).

Can be used for distance measurement, velocity.

Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,

wireless remote control.

Size: 21 x 15 cm (L x W).

Wheel size: 6.5 x 2.7cm (Dia. x H)

₹590.00
₹590.00 Add to cart
Add to Wishlist
20CM Jumper Wire Male to Male Dupont 40pc,10colours (Multicolor)

40P color DuPont line

Length: 200mm

Weight: 30 gm

Compatible with 2.54mm spacing pin headers

40pcs chromatic male to male color jump wire

High quality and in good working condition

Durable and reusable

Easy to install and use

₹89.00
₹89.00 Add to cart
Add to Wishlist
30pcs Flexible Breadboard Jumper Wires

The head of the cables is stronger, Don’t worry it will easy to fall.

Use for Arduino Or other kinds of circuit experiment.

High quality and in good working condition

Durable and reusable

Easy to install and use

₹65.00
₹65.00 Add to cart
Add to Wishlist
4 WD Double Layer Smart Robot Car Chassis Kit

Very handy and simple in assembling/disassembling.

Strong components so as to withstand extreme terrain conditions.

Transparent Car Chassis.

Attractive design.

₹899.00
₹899.00 Add to cart
Add to Wishlist
433Mhz RF Wireless transmitter and receiver kit

Wide input supply (2.5 V to 12V)

Easy to integrate (V+, GND, and Data)

The device in deep sleep mode when Data pin is grounded

Very small dimension.

₹99.00
₹99.00 Add to cart
Add to Wishlist
Arduino Nano | ATmega328P Microcontroller Board

Operating Voltage (logic level): 5V

With USB cable and Soldered Connector

8 analog inputs ports: A0 ~ A7

14 Digital input / output ports: TX, RX, D2 ~ D13

1 pair of TTL level serial transceiver ports RX / TX

Using Atmel Atmega328P-AU MCU

There is a bootloader installed in it

Standard 0.1” spacing DIP (breadboard friendly).

Manual reset switch.

₹240.00
₹240.00 Add to cart
Add to Wishlist
Arduino Pro Mini ATMEGA328P

Microcontroller: ATmega328

Circuit Operating Voltage: 3.3V

Clock frequency: 8MHz.

Digital I/O Pins: 14

8 analog input port: A0 ~ A7.

A pair of TTL level serial port transceiver : RX / TX.

6 PWM port: D3, D5, D6, D9, D10, D11.

Support serial download.

₹190.00
₹190.00 Read more
Add to Wishlist
Arduino Uno CH340 with Cable and Transparent acrylic case for Uno

A basic Arduino Kit including everything to get started.

It includes a quality proven Arduino Cable.

It includes a strong and sturdy Transparent Acrylic Case.

Microcontroller ATmega328 (SMD) – Interface CH340G

Operating Voltage: 5V

Input Voltage (recommended): 7-12V

Digital I / O Pins 14 (of which 6 provide PWM output)

Analog Input Pins: 6

₹410.00
₹410.00 Add to cart
Add to Wishlist
Arduino Uno CH340 with Cable compatible with Arduino

Microcontroller ATmega328 (SMD) – Interface CH340G

Operating Voltage: 5V

Input Voltage (recommended): 7-12V

Input Voltage (limits): 5-20V

Digital I / O Pins 14 (of which 6 provide PWM output)

Analog Input Pins: 6

It includes a quality proven Arduino Cable.

₹425.00
₹425.00 Add to cart
Add to Wishlist
Arduino uno CH340 with cable,case,400 Hole Breadboard and dupont jumper wire

A basic Arduino Kit including everything to get started

It includes a Arduino uno CH340 a quality proven Arduino Cable.

It includes a strong and sturdy Transparent Acrylic Case.

30pcs Flexible Breadboard Jumper Wires

Breadboard 400 Tie Point

High quality and in good working condition

Easy to install and use

₹580.00
₹580.00 Add to cart
Add to Wishlist
Arduino UNO R3 Board high quality-compatible with Arduino

Micro-controller : ATmega328.

Operating Voltage : 5V.

Input Voltage (recommended) : 7-12V.

Digital I/O Pins : 14 (of which 6 provide PWM output).

Analog Input Pins : 6.

.

₹370.00
₹370.00 Add to cart
Add to Wishlist
Arduino Uno R3 with Cable and Transparent acrylic case for Uno R3

A basic Arduino Kit including everything to get started.

It includes a quality proven Arduino Cable.

It includes a strong and sturdy Transparent Acrylic Case.

Micro-controller : ATmega328

Operating Voltage: 5V

Input Voltage (recommended) : 7-12V

Digital I/O Pins: 14 (of which 6 provide PWM output)

Analog Input Pins: 6

₹495.00
₹495.00 Add to cart
Add to Wishlist
Arduino Uno R3 with Cable compatible with Arduino

Micro-controller : ATmega328.

Operating Voltage : 5V.

Input Voltage (recommended) : 7-12V.

Digital I/O Pins : 14 (of which 6 provide PWM output).

Analog Input Pins : 6.

₹405.00
₹405.00 Add to cart
Add to Wishlist
Arduino uno R3 with cable,case,400 Hole Breadboard and and dupont jumper wire

A basic Arduino Kit including everything to get started

It includes a Arduino uno R3 a quality proven Arduino Cable.

It includes a strong and sturdy Transparent Acrylic Case.

It includes 30pcs Flexible Breadboard Jumper Wires

Breadboard 400 Tie Point

High quality and in good working condition

Easy to install and use

₹550.00
₹550.00 Add to cart
Add to Wishlist
Cable For Arduino UNO/MEGA (USB 2.0 A to B) – 50 cm

Up to 480 Mbps data transfer rate.

USB Type: Type-A to Mini-B

Weight: 15 gm

Length: 50 cm

Exclusively designed for Arduino boards.

₹48.00
₹48.00 Add to cart
Add to Wishlist
DIY 16 in 1 Sensor Module Kit for Arduino/Raspberry Pi-Multi 1 set

For beginners who are interested in Arduino

A complete set of Arduino’s most common and useful electronic components

Infrared sensor receiving module

Laser sensor module

Temperature and humidity sensor module

Infrared sensor module

5v relay module

Obstacle avoidance sensor module.

₹990.00
₹990.00 Add to cart
Add to Wishlist
ESP8266 5V WiFi relay module ,smart home component, mobile APP remote control module

Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time

Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay

Transmission Distance : 400m (max)

Relay : 5V,10A/250V AC 10A/30V DC

Baud Rate: 9600.

Diode effusion protection;

Short response time

₹699.00
₹699.00 Add to cart
Add to Wishlist
GL-12 830 Points Solderless Breadboard

100% brand new and high quality

Practical and useful

Solderless breadboard with 840 points

Completely reusable and have a self-adhesive back

Easy component placement

₹79.00
₹79.00 Add to cart
Add to Wishlist
HC05 Bluetooth Transceiver Module

A breakout board for easier connectivity

Designed for 3.3v level TTL but will accept 5v level as well

Built in antenna with a range of up to 30 feet (range is dependent on a lot of things such as any obstacles or walls in the way so it may vary)

Supports baud rates from 1200 to 1382400 bps (default is 9600 bps)

VCC input voltage 3.3v to 6v

Bluetooth Specification v2.0+EDR

₹349.00
₹349.00 Add to cart
Add to Wishlist
LoRa ESP32 Module: OLED Display Bluetooth WIFI IOT Development Board for Arduino

The ESP32 LoRa SX1278 Module with 0.96 Inch Blue OLED Display , this series is the new development of the cost-effective networking program

Supports Sniffer, Station, softAP and Wi-Fi Direct modes

Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b

Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n

Receiver sensitivity up to – 98 dBm

UDP continues to throughput by 135 Mbps

₹1,990.00
₹1,990.00 Read more