Shop - Foxlab Store

Recommended Products

Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
NodeMcu ESP8266 V3 IoT development Board

Greatly speed up your IOT application developing process

Open-source, Interactive, Programmable, Low cost, WI-FI enabled

Power input: 4.5V ~ 9V (10VMAX), USB-powered

Transfer rate: 110-460800bps

Support UART / GPIO data communication interface

Support Smart Link Smart Networking

Working temperature: -40°C ~ + 125°C

Drive Type: Dual high-power H-bridge

Don’t need to download resetting

A great set of tools to develop ESP8266

Flash size: 4MByte

₹295.00
₹295.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino Uno R3 with Cable compatible with Arduino

Micro-controller : ATmega328.

Operating Voltage : 5V.

Input Voltage (recommended) : 7-12V.

Digital I/O Pins : 14 (of which 6 provide PWM output).

Analog Input Pins : 6.

₹405.00
₹405.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino Uno R3 CH340 ATmega328p Development Board Compatible with Arduino

Microcontroller ATmega328 (SMD) – Interface CH340G

Operating Voltage: 5V

Input Voltage (recommended): 7-12V

Input Voltage (limits): 5-20V

Digital I / O Pins 14 (of which 6 provide PWM output)

Analog Input Pins: 6

₹299.00
₹299.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Sound Detection Module Sensor Compatible With Arduino

Main chip: LM393, Electret condenser microphone

Working voltage: DC 3.3-5V

Induction distance is 0.5M

Signal output Indication

Single channel signal output

The output effective signal is low level.

₹99.00
₹99.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
SW-520D – Tilt Sensor Module

Supply voltage: 3.3 V to 5V

Output can directly connected to controller

TTL level output

Maximum output current : 15mA

Can work on low voltages

Maximum operating temperature: 0°C to + 80°C

Easy interface

Long life.

₹130.00
₹130.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
30pcs Flexible Breadboard Jumper Wires

The head of the cables is stronger, Don’t worry it will easy to fall.

Use for Arduino Or other kinds of circuit experiment.

High quality and in good working condition

Durable and reusable

Easy to install and use

₹65.00
₹65.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino UNO R3

Dimensions : 79.5 x 64.5 x 21 mm.

Material: A grade acrylic sheet.

For Arduino UNO R3 Development Board only.

With screw copper pillar and installation instructions.

To protect your little computer against damages, dust and scratches Clear Top and Bottom.

This case provides easy access to all ports.

It requires no tools for easy assembly and disassembly.

Simply Clicks Together Enclosure.

₹89.00
₹89.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
433Mhz RF Wireless transmitter and receiver kit

Wide input supply (2.5 V to 12V)

Easy to integrate (V+, GND, and Data)

The device in deep sleep mode when Data pin is grounded

Very small dimension.

₹99.00
₹99.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
4×4 Matrix Keypad Membrane Switch

Ultra-thin design & adhesive backing provides easy integration to any project

Excellent price-performance ratio

Easy communication with any microcontroller

5 pins 2.54mm pitch connector, 4x 4type 16 keys.

Sticker can peel off for adhesive mounting.

Operating Voltage (V): 12 DC

₹130.00
₹130.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
TSOP1738 IR Receiver

Very low supply current

Photo-detector and preamplifier in one package

Internal filter for PCM frequency

Improved shielding against EMI

Supply voltage: 2.5 V to 5.5 V

Improved immunity against ambient light

₹40.00
₹40.00 Add to cart

View cart “2 WD Smart Robot Car Chassis Kit” has been added to your cart.

Shop

Showing 1–20 products from 63 products

Sort by

Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
100 RPM BO Motor – L-Shape

Low density: lightweight, low inertia.

Capability to absorb shock and vibration as a result of elastic compliance.

Ability to operate with minimum or no lubrication, due to inherent lubricity.

The relatively low coefficient of friction.

Operating Voltage(VDC): 3~12

Shaft Length (mm): 8.5

Shaft Diameter (mm): 5.5 (Double D-type)

No Load Current: 40-180mA.

Rated Speed(After Reduction): 100 RPM

Rated Torque: 1 Kgcm

₹98.00
₹98.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
100 RPM Dual Shaft BO Motor-Straight

Low density: lightweight, low inertia.

Capability to absorb shock and vibration as a result of elastic compliance.

Ability to operate with minimum or no lubrication, due to inherent lubricity.

The relatively low coefficient of friction.

Operating Voltage(VDC): 3~12

Shaft Length (mm): 8.5

Shaft Diameter (mm): 5.5 (Double D-type)

No Load Current: 40-180mA.

Rated Speed(After Reduction): 300 RPM

Rated Torque: 0.35 Kgcm

₹85.00
₹85.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
2 WD Smart Robot Car Chassis Kit

Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.

This car is the tachometer encoder.

With a 4 AA battery box (batteries not included).

Can be used for distance measurement, velocity.

Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,

wireless remote control.

Size: 21 x 15 cm (L x W).

Wheel size: 6.5 x 2.7cm (Dia. x H)

₹590.00
₹590.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
20CM Jumper Wire Male to Male Dupont 40pc,10colours (Multicolor)

40P color DuPont line

Length: 200mm

Weight: 30 gm

Compatible with 2.54mm spacing pin headers

40pcs chromatic male to male color jump wire

High quality and in good working condition

Durable and reusable

Easy to install and use

₹89.00
₹89.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
30pcs Flexible Breadboard Jumper Wires

The head of the cables is stronger, Don’t worry it will easy to fall.

Use for Arduino Or other kinds of circuit experiment.

High quality and in good working condition

Durable and reusable

Easy to install and use

₹65.00
₹65.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
4 WD Double Layer Smart Robot Car Chassis Kit

Very handy and simple in assembling/disassembling.

Strong components so as to withstand extreme terrain conditions.

Transparent Car Chassis.

Attractive design.

₹899.00
₹899.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
4×4 Matrix Keypad Membrane Switch

Ultra-thin design & adhesive backing provides easy integration to any project

Excellent price-performance ratio

Easy communication with any microcontroller

5 pins 2.54mm pitch connector, 4x 4type 16 keys.

Sticker can peel off for adhesive mounting.

Operating Voltage (V): 12 DC

₹130.00
₹130.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
433Mhz RF Wireless transmitter and receiver kit

Wide input supply (2.5 V to 12V)

Easy to integrate (V+, GND, and Data)

The device in deep sleep mode when Data pin is grounded

Very small dimension.

₹99.00
₹99.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino MEGA 2560 R3 ATmel MCU ATMEGA16U2 high quality Board

54 digital input / output terminals (14 of which have programmable PWM outputs).

16 analog inputs.

4 UARTs (hardware serial ports).

16 MHz crystal clock.

Operating voltage: 6 ~ 12v.

Dimensions: 110 x 53 x 15 mm.

₹820.00
₹820.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino Nano | ATmega328P Microcontroller Board

Operating Voltage (logic level): 5V

With USB cable and Soldered Connector

8 analog inputs ports: A0 ~ A7

14 Digital input / output ports: TX, RX, D2 ~ D13

1 pair of TTL level serial transceiver ports RX / TX

Using Atmel Atmega328P-AU MCU

There is a bootloader installed in it

Standard 0.1” spacing DIP (breadboard friendly).

Manual reset switch.

₹240.00
₹240.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino Pro Micro ATmega32U4 5V,16Mhz new Mini Leonardo Micro-controller Development Board

ATMEGA32U4 running in 5V / 16MHz

Support Arduino IDE

Micro USB interface programming on the board

Four 10-bit ADC pin

12 digital I / O (5 PWM capability)

Rx and Tx hardware serial connection

₹330.00
₹330.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino Pro Mini ATMEGA328P

Microcontroller: ATmega328

Circuit Operating Voltage: 3.3V

Clock frequency: 8MHz.

Digital I/O Pins: 14

8 analog input port: A0 ~ A7.

A pair of TTL level serial port transceiver : RX / TX.

6 PWM port: D3, D5, D6, D9, D10, D11.

Support serial download.

₹190.00
₹190.00 Read more
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino programmable robot Basic Starter Learning kit

All-in-one kit, a great starter kit for learning coding.

Microcontroller ATmega328 (SMD) – Interface CH340G

Operating Voltage: 5V

Input Voltage (recommended): 7-12V

Input Voltage (limits): 5-20V

Digital I / O Pins 14 (of which 6 provide PWM output)

Analog Input Pins: 6

₹680.00
₹680.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino Uno CH340 with Cable and Transparent acrylic case for Uno

A basic Arduino Kit including everything to get started.

It includes a quality proven Arduino Cable.

It includes a strong and sturdy Transparent Acrylic Case.

Microcontroller ATmega328 (SMD) – Interface CH340G

Operating Voltage: 5V

Input Voltage (recommended): 7-12V

Digital I / O Pins 14 (of which 6 provide PWM output)

Analog Input Pins: 6

₹410.00
₹410.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino Uno CH340 with Cable compatible with Arduino

Microcontroller ATmega328 (SMD) – Interface CH340G

Operating Voltage: 5V

Input Voltage (recommended): 7-12V

Input Voltage (limits): 5-20V

Digital I / O Pins 14 (of which 6 provide PWM output)

Analog Input Pins: 6

It includes a quality proven Arduino Cable.

₹425.00
₹425.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino uno CH340 with cable,case,400 Hole Breadboard and dupont jumper wire

A basic Arduino Kit including everything to get started

It includes a Arduino uno CH340 a quality proven Arduino Cable.

It includes a strong and sturdy Transparent Acrylic Case.

30pcs Flexible Breadboard Jumper Wires

Breadboard 400 Tie Point

High quality and in good working condition

Easy to install and use

₹580.00
₹580.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino UNO R3 Board high quality-compatible with Arduino

Micro-controller : ATmega328.

Operating Voltage : 5V.

Input Voltage (recommended) : 7-12V.

Digital I/O Pins : 14 (of which 6 provide PWM output).

Analog Input Pins : 6.

.

₹370.00
₹370.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist

Arduino Uno R3 Beginners Kit
₹2,100.00
₹2,100.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino Uno R3 CH340 ATmega328p Development Board Compatible with Arduino

Microcontroller ATmega328 (SMD) – Interface CH340G

Operating Voltage: 5V

Input Voltage (recommended): 7-12V

Input Voltage (limits): 5-20V

Digital I / O Pins 14 (of which 6 provide PWM output)

Analog Input Pins: 6

₹299.00
₹299.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino Uno R3 with Cable and Transparent acrylic case for Uno R3

A basic Arduino Kit including everything to get started.

It includes a quality proven Arduino Cable.

It includes a strong and sturdy Transparent Acrylic Case.

Micro-controller : ATmega328

Operating Voltage: 5V

Input Voltage (recommended) : 7-12V

Digital I/O Pins: 14 (of which 6 provide PWM output)

Analog Input Pins: 6

₹495.00
₹495.00 Add to cart

View all

Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
DS3231 AT24C32 IIC Module Precision Clock Module RTC DS3231SN Memory module

1Hz output pin SQW.

32KHz output pin 32K.

Voltage Supply: 2.2 V ~ 5.5 V (for RTC).

Time Format: HH: MM: SS (12/24 hr).

Date Format: YY-MM-DD-dd.

DS3231 based RTC with 2032 Battery Holder.

Highly Accurate RTC

Real-Time Clock Counts

Digital Temp Sensor Output.

Register for Aging Trim.

Two Time-of-Day Alarms.

Programmable Square-Wave Output Signal.

Configurable I2C device Address for AT24C32 using SMD jumpers on PCB (A0, A1, A2).

₹115.00
₹115.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Dual USB 3.7v to 5V, 2A,1A Power Bank DIY 18650 Li-Io & Li-Po Charger module (JX-887Y)

4-level LED lamp display power, not working state intelligent automatic shutdown;

Built-in lithium battery protection IC, over-current, over charging, under voltage protection;

Dual USB output ports.

Dimensions: 68 x 34 x 9 mm (LxWxH)

Weight: 10 gm

Input port: Micro USB

Output port: USB

Output parameters: 5V 1A/5V 2A

Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above

₹189.00
₹189.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
Arduino Pro Micro ATmega32U4 5V,16Mhz new Mini Leonardo Micro-controller Development Board

ATMEGA32U4 running in 5V / 16MHz

Support Arduino IDE

Micro USB interface programming on the board

Four 10-bit ADC pin

12 digital I / O (5 PWM capability)

Rx and Tx hardware serial connection

₹330.00
₹330.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
CD74HC4067 High Speed CMOS 16-Channel Analog/Digital Multiplexer Breakout Module

2V to 6V operation

“On” resistance: 70 Ohms @ 4.5V

6ns break-before-make @ 4.5V

Wide operating temperature range: -55C to 125C

₹180.00
₹180.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist

Arduino Uno R3 Beginners Kit
₹2,100.00
₹2,100.00 Add to cart
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
UNO Based ESP8266 Nodemcu Development Board For Arduino Compatible

Based on ESP-8266EX.

Arduino compatible, using Arduino IDE to program.

Support OTA wireless upload.

Onboard 5V 1A Switching Power Supply (highest input voltage 24V).

The direct use of Arduino IDE development, the same operation with Arduino UNO.

Operating Voltage: 3.3V

Digital I/O Pins: 11

Analog Input Pins:

₹360.00
₹360.00 Read more
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU

LDR Light Sensor on board

WS2812 Led on board

Includes CH340G USB-to-UART programmer

Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin

Supports 3 modes: AP,STA,AP+STA

Dimensions: 24mm x 16mm

Micro USB connection for power and/or programming

₹420.00
₹420.00 Read more
Add to Wishlist

Product added! Browse Wishlist

The product is already in the wishlist! Browse Wishlist
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

802.11 b/g/n Standards

Wi-Fi Direct (P2P), soft-AP

1MB Flash Memory

Integrated low power 32-bit CPU could be used as an application processor

A-MPDU & A-MSDU aggregation & 0.4ms guard interval

Wake up and transmit packets in < 2ms

Standby power consumption of < 1.0mW (DTIM3)

₹230.00
₹230.00 Read more